USED Gibson USA / Les Paul Studio 2020 Wine Red [12]

The 2020 version of the Les Paul Studio, which has been made affordable by keeping decorations as simple as possible, is now in stock.
The non-binding design, dish inlays, and chrome-plated pickup covers give it a simple look, but it still retains the look of a traditional Les Paul.

The pickups are a high-power combination of 490R/498T, and the volume pod can be pulled up for coil tapping, allowing the guitar to be used for everything from fat sounds to crisp single-coil tones.

The mahogany back/maple top body with ultra-modern weight relief provides a traditional sound while reducing weight.
There is a ding on the 6-string end of the head top and a ding on the 1-string end of the head.
There is a crack on the side of the neck on the first string side, but it has been glued back in place and there is no problem with its current use.
There are many dents and scratches scattered throughout the instrument, but it has been maintained and cleaned at our repair center and is in good playability condition.
The toggle switch plate and pickguard are missing.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 202730103
Year of manufacture: 2023
Country of manufacture: USA
Case: Original hard case
Weight: 3.73kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
202730103

Year of manufacture
2023

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.73kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
23.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing