USED Paul Reed Smith (PRS) / McCarty 2009 Smokeburst [12]

This is a classical model named after Mr. Ted McCarty.
This model was created on the advice of Ted McCarty, who once served as president of Gibson and was involved in the development of Les Paul.

The body is thicker than the Custom 22 and 24, and the wide fat neck shape gives it a more traditional and orthodox sound compared to other PRS models.

The pickups are based on 1957 humbuckers, with two 57/08 pickups developed in 2008. The tone can also be pushed/pulled to produce a sparkling single-coil tone.

Since 2000, PRS has been active in the hard and heavy band sound, and this McCary, which is inspired by vintage guitars, is one of the most atmospheric guitars.
There are some paint chips on the tip of the head, and the neck grip has some small and large dents scattered around.
The top of the body also has some small and large dents and paint chips, and there are numerous scratches and scuffs throughout the body.
The hardware also shows signs of wear, but has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 09 149670
Year of manufacture: 2009
Country of manufacture: USA
Case: Original hard case
Accessories: Bird tag, wrench
Weight: 3.16kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.0mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
09 149670

Year of manufacture
2009

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Bird tag, wrench

Weight
3.16kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
24.0mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing