USED g'7 G'Seven Special / g7-ST Type1 Relic Candy Apple Red [12]

g'7 Special's realistic ST replica is now in stock.

This model is based on the 60s ST by g'7 Special, a guitar workshop in Shinjuku that has been used by famous artists in Japan.

This replica features early 60s specs such as an alder body, 3-ply pickguard, small head, slabboard rosewood fretboard, and clay dot.

The pickups are believed to be the original g7-Pick Ups, and you can enjoy the withering vintage tone that is faithful to the picking nuance.

This ST type is a perfect fusion of the careful construction that can only be achieved by handmade in Japan, high quality as an instrument, and realistic looks with full of vintage feel.

There are some paint cracks, peeling, dents, and scratches on the body due to the aged process, but it is in good condition with little signs of actual use.
It has been maintained and cleaned at our repair center and is in good playability.
The arm is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.56kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.56kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment