USED Gibson USA / Les Paul Studio 2000 Ebony [12]

A 2000 Les Paul Studio is now in stock.
The Les Paul Studio features a body without binding and a simple appearance.

Wood specs are the same as Les Paul Standard with maple top/mahogany back body and mahogany neck/rosewood fingerboard jointed by set neck.

The pickups are high-output 490/498 pickups with a slightly heavier weight of 4.00kg, but the edgy tone is less prone to sound crushing and produces sharp, clear clean tones and extended drive sounds.
The paint on the tip of the head is chipped and a part of the truss rod cover is cracked, but it can be fixed.
There is a rice-sized ding/paint peeling on the top of the body by the 17th fret, and the paint is peeling on the body end due to rubber burns from the guitar stand.
There are also numerous scratches and dings scattered throughout, and the hardware is dull.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 01540382
Year of manufacture: 2000
Country of manufacture: USA
Case: Original hard case
Weight: 4.00kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.9mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
01540382

Year of manufacture
2000

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
4.00kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
23.9mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment