USED Gibson USA / ES-335 Dot Reissue 1995 Vintage Sunburst [12]

A 2004 ES-335 with figured maple giving it a luxurious feel is now in stock.
The ES-335 has reigned as the king of semi-acoustic models since 1958.
It has a laminated maple semi-hollow body, slim grip mahogany neck, rosewood fingerboard, dot position marks, and other familiar specs, and is equipped with Grover pegs.

Two 57Classic pickups are installed, and the mild and deep sound combined with the airy feel of the semi-hollow construction is a feature of this instrument.

This instrument is made of rare maple with thin tiger wood and bird's eye, and it is one that will satisfy your desire for ownership.
There is a paint chip around the tip of the head and a scratch on the top of the head logo.
There is a paint crack on the horn on the top 6-string side of the body, and there are many scratches and dents scattered throughout the body, and the hardware is dull.
The overall appearance of the instrument is good, but it has been maintained and cleaned at our repair center and is in good playability condition.
A non-genuine hard case is included since a genuine hard case is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 90805308
Year of manufacture: 1995
Country of manufacture: USA
Case: Non-authentic hard case
Weight: 3.98kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 90805308

Year of manufacture1995

Country of manufactureUnited States

CaseNon-genuine hard case

Weight 3.98kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near 1st fret 20.6mm

Neck thickness 22.8mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment