USED Fender / American Ultra Telecaster Cobra Blue [12]

The "American Ultra" series Telecaster is now in stock.
This model is the predecessor of the current "American Ultra II" series and has an alder body, maple neck/fingerboard with 22F specification and a 10-14" compound radius fingerboard.

The D-shaped neck boasts high playability with carefully rolled-off edges.

The Ultra Noiseless Vintage Tele pickups cover a wide range of sounds from transparent clean to drive, and the S-1 switch can be used to switch between parallel and series pickup combinations.

The S-1 switch can be used to switch between parallel and series pickup combinations, making this a high-end Telecaster that can be used for all purposes!
There is a buckle on the back of the body, and some of the plating on the joint plate has peeled off.
There are some minor scratches and dings scattered throughout, and there is a scratch around the truss rod adjustment port.
Although there are some signs of use, each part has been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: US22035439
Year of manufacture: 2022
Country of manufacture: USA
Case: Original hard case
Accessories: Strap lock
Weight: 3.67kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, enough fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 22.6mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10") / 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number US22035439

Year of manufacture 2022

Country of manufacture USA

CaseGenuine hard case

AccessoriesStrap lock

Weight3.67kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near the 1st fret: 21.4mm

Neck thickness 22.6mm near 12th fret

SCALE 648mm (25.5")

RADIUS254mm (10") / 356mm (14")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment