USED Epiphone / Les Paul Custom LPC-90 Made in Japan Ebony [12]

Japanese-made Epiphone Les Paul Custom with Ebony fretboard is now in stock.
The LPC series was produced from 1998 to 2002 as a limited release in Japan, and this is the LPC-90 with an ebony fingerboard.

Like the Gibson Les Paul Custom of the 1950s, it has a mahogany top and back body construction, and a mahogany neck with an ebony fingerboard and a long tenon set neck joint.

The headstock has the same design as the Gibson, with GIBSON engraving on the truss rod cover, and an ABR-1 type bridge is also used, reproducing the looks and specs that are close to those of the original.
There are large paint peels on the head back, around the 3rd string peg gear box, around the strap pin on the body end side, and on the 6th string side body end.
There is a chipped paint crack from the end of the nut on the 1st string side to the center of the neck grip, but it does not affect the wood.
There are also numerous scratches and dings scattered throughout, and the hardware is dull.
The pickguard is missing and there is an overall feeling of use, but playability is good as each part has been maintained and cleaned at our repair center, including replacement of the switch, control pot, jack, jack plate, escutcheon, and strap pins.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 807783
Year of manufacture: 1998
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.26kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.1mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 25.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: Toggle switch, 4 pots, jack, jack plate, strap pin, 2 escutcheons
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there are scratches, dents, etc. that may not show up in the photos or are not listed in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.