USED GRECO Greco / PB-750 Tetsu Yamauchi Model [20]

This is the original model of Tetsu Yamauchi, the bass player of Faces at that time.
It was the first Greco artist model.
It has a plug wood body and 1 piece maple neck. The front pickup is PB type split type PU109 and the rear is original double pole piece pickup PU118.

* After our arrival, cleaning, overall adjustment (string replacement, rod adjustment, octave adjustment, string height adjustment), electrical repair, nut groove adjustment, and burr removal have been performed. The neck has a large wave/high spring and has been adjusted by fretting.
The frets have also been lowered along with the fret adjustment.

There are some minor scratches and parts are dull.

Item rank: B (average)

Year of manufacture: 1976
Truss rod: Nearly fully tightened
Fretboard: less than 50%.
Accessories ： Hard case / Non-genuine
Country of Origin ： Japan
Weight ： 4.13kg
Serial ： K762470

Truss rod: No problem, confirmed up to 60 degrees left and right.
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|3.0mm above 12th fret
String height(treble string side)|2.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|23.8mm
SCALE|864mm (34")
RADIUS|-
Strings used for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at next repair.

String height (bass string side)
3.0mm above the 12th fret

String height (treble string side)
2.5mm above the 12th fret

Nut width
42.1mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
23.8mm

Scale
864mm (34")

RADIUS
-RADIUS

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon nut adjustment