USED Epiphone Epiphone / Elitist Les Paul Standard Tobaco Sunburst [20]

Japanese Fujigen factory made Les Paul standard model.
Maple top mahogany back body, mahogany neck with rosewood fingerboard.
The use of carefully selected woods and parts, and the attention to detail can be felt in this model, which is highly regarded both in Japan and overseas. The Gibson head design is also an attractive feature of this model.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, mortise and tenon nut adjusted, so it is in good playing condition.

The hard case has exterior stains.
There are dents with paint chips on the front of the head and the lower part of the body back.
Other than that, it is in good condition with only minor scratches.

Item rank: B+ (Good)

Year of manufacture: Made in 2008
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 4.35kg
Serial ： F800234

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fretboard: No problem, enough fretboard height
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.9mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|23.6mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.9mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
23.6mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment, nut adjustment