USED Orville Orville / LPS-75 Cherry Sunburst [20]

The Orville was made in Japan following the specifications of the original Gibson and is highly acclaimed both in Japan and overseas.
The body is made of maple top and mahogany back, and a mahogany neck is used for the royal specifications.
The clear sound of the original humbuckers (made in Japan) with moderate output shows its true value in clean and crunchy distortion, making it easy to handle regardless of genre.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are a few dents on the back corner of the body with clear paint cracks and dents in the paint.
There are also some other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 1996
Truss rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories: soft case/not genuine
Country of Origin ： Japan
Weight ： 3.93kg
Serial ： 606265

Truss Rod: No problem, confirmed up to 60 degrees left and right (not much left)
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|21.3mm
Neck thickness (near 12th fret)|25.1mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret Remaining
There is a note that the frets are low, but can still withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
21.3mm

Neck Thickness (near 12th fret)
25.1mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment