USED Fender Japan Fender Japan / MG69 Yellow White [20]

This mustang follows the '69 style with a short scale, compact body, elbow contour and back contour. Basswood body, maple neck, round-applied rose fingerboard, 2 x MG-SINGLE PUs, and dynamic vibrato.
Popular for its easy handling, the mustang is recommended for guitarists with small hands and those who use a wide stretch a lot.
The pickguard and both pickups have been replaced with Lindy Freling, REAL54MUSTANG.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, mortised, and electrical repairs have been done since we received it.

The arm is missing. Overall, it is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: 2010-2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.21kg
Serial ： MIJ U019543

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.3mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|23.4mm
SCALE|610mm (24")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
40.3mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
23.4mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair