USED Fender Mexico / Troy Van Leeuwen Jazzmaster Oxblood [20]

Guitarist Troy Van Leeuwen has contributed to some of the most acclaimed and progressive bands in alternative rock.
Made at the Ensenada Factory in Baja California, this is an oxblood matching head version with beautiful pearloid block markers.
It has a vintage-style 21-fret 7.25" R fingerboard with the acclaimed American Vintage 65 Jazzmaster pickups and mustang saddles that reduce the risk of string slippage.
The Lead/Rhythm preset circuit is a toggle switch, so you can use it as a kill switch for aggressive playing.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are some signs of use such as minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: Made in 2022
Truss Rod ： Plenty of room
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： Mexico
Weight ： 3.76kg
Serial ： MX22079534

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.2mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment