USED Ibanez Ibanez / MC2924 Transperent Red [20]

A famous Japan Vintage instrument, Ibanez MC2924 made in 1985.
The MC series is still a popular product released by Ibanez and is used by many artists both in Japan and abroad.
The MC2924 features an ash body with through neck construction, maple + walnut 5-piece neck, ebony fingerboard, and 24 frets for a versatile approach.
Original low impedance pickups are installed on the pickups.
The knobs and circuit have been replaced and the current 3BP2BA is installed.
Controls are Vol, Balancer, and 2-band EQ.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and mortised after our arrival.

There are some spots on the gold parts and touch-up marks on the top of the body and next to the rear pickup.
There are several dents with paint chips on the top of the head, and overall, there are some minor scratches and dents.

Item rank: B+ (Good)

Year of manufacture: 1985
Truss rod: fully tightened
Fretboard: 60-70% full
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 4.18kg
Serial : L851279

Truss Rod
Fret Remaining: Still good for cutting, but the frets are low.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|40.6mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.9mm
SCALE|864mm (34")
RADIUS|254mm (10")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

truss rod
Tightened

Fretboard Remaining
Note: The frets are low, but can still withstand cutting.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
40.6mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.9mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment