USED Squier by Fender Squier / Boxer ST-331 Snow White [20]

This is a Japanese Squier Boxer Series ST-331.
The ST-331 has a basswood body, maple neck, rosewood fretboard, and one pickup.
The pickups have been replaced with Dimazio DP207, and the controls have been modified to 1Vol, 1Tone, direct mini-switch, and series parallel.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.

There is a paint crack at the joint part.
There are some parts that have rust and scratches on the top of the body, and there are some scratches and dents.

Item rank: B+ (Good)

Year of manufacture: 1985
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non genuine arm
Country of Origin ： Japan
Weight ： 3.44kg
Serial ： A028666

Truss Rod : No problem.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|22.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.1mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
22.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair