USED Gibson Custom Shop / Tak Matsumoto DC Standard 1st Edition Aqua Blue [20]

This is a Gibson Custom Shop Tak Matsumoto DC Standard Aqua Blue 1st Edition, limited to 200 pieces.
Since this is a 1st Edition, the hard case is limited edition.
The truss rod cover and switch back plate have been replaced with black plastic, and the blue color is missing.
Flame maple/mahogany body and rosewood/mahogany neck with Avalon fingerboard inlays.
It has Burstbucker #2 / Burstbucker #3 pickups.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

There are some parts have some cuss marks, minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Hard Case / Certificate of Authenticity
Country of Origin ： USA
Weight ： 3.42kg
Serial ： TAK AB 033

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|24.0mm
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
24.0mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair