USED GRECO Greco / EG700S Sunburst [20]

LP type with solid machined maple top & pancake structured mahogany back body, rosewood fingerboard maple neck.
The pickups are probably original and according to the data, U-2000 pickups are installed, which output a slightly hard and bouncy humbucker sound.
Sticker from the time of sale is also included.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, electrical repair, and nut adjusted, so it is in good playing condition.

There are some parts that have some scuffs.
There are some minor scratches and small dents overall, but considering the age, it is in relatively good condition.

Item rank: B+ (Good)

Year of manufacture: 1978
Truss rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Hard case / Non-genuine sticker from the time of sale
Country of Origin ： Japan
Weight ： 4.36kg
Serial ： 1785695

Truss Rod : No problem, confirmed up to 60 degrees to the left and right (not much left)
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|23.3mm
SCALE|628mm (24.75")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret Remaining
There is a note that the frets are low, but can still withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.5mm

Neck Thickness (near 1st fret)
20.1mm

Neck Thickness (near 12th fret)
23.3mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, nut adjustment