USED Epiphone Epiphone / Elitist Tak Matsumoto Les Paul Standard TakBurst [20]

Signature model of Mr. Tak Matsumoto made in Japan.
Although this is a cost-performance model, it was made in Japan and uses quilted maple for the top material, which produces a scaly grain pattern.
The coloring is Tak Burst, an original color that Mr. Matsumoto is said to have visited the Gibson factory in person and liked it so much that he adopted it.
Fingerboard is rosewood with Avalon dish inlays.
Burstbucker 2 & 3 pickups are mounted on the fretboard for powerful sound that does not sound flat even when distorted.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repair, so it is in good playing condition.

There are two cracks on the knobs, and some parts have some stains.
The paint is dented due to a scratch on the buckle, and there are some minor scratches and dents overall.

Item rank: B+ (Good)

Year of manufacture: Made in 2003
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Gig bag/not genuine
Country of Origin ： JAPAN
Weight ： 3.92kg
Serial ： F301364

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fretboard: No problem.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|22.7mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.2mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
22.7mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair