USED Fender Japan Fender Japan / ST54-120DMC 2Tone Sunburst [20]

Fender Japan advanced high-grade model ST54-120DMC.
Vintage Special Series with lacquer finish on the paint and each high grade parts.
The original pickups are DiMaggio Collection Classical Vintage DSC-1.
The body is made of good quality ash with very beautiful grain and 2-piece center.
The neck is one-piece maple with a soft V-shape.
The case included is a current Fender soft case.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and fret grated, so it is in good playing condition.

There are some parts that have some chips and minor rust.
There is a ding on the lower side of the body with wood dents, and there are dings on the fingerboard and back of the neck with paint dents.
There are many other scratches and dings with paint dents overall, and there is a slightly strong sense of use.

Item rank: B+ (Good)

Year of manufacture: 2004-2006
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： Japan
Weight ： 2.93kg
Serial ： CIJ R071503

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|24.5mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.2mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment