USED Fender Japan Fender Japan / TL52-TX Vintage Natural [20]

TL52-TX model with Texas Special pickups for the '52 Telecaster, the classic electric guitar by the Fender Japan brand.
Made of ash body and maple 1-piece neck, which is one of the most popular materials for Telecasters.
Button-type string guide, negative screw, and other specifications from 1952 are reproduced.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

There are some parts have some spots.
There is a large ding on the back end of the body with paint cracks and dents in the wood.
There are other minor scratches and small dents with dents in the paint.

Item rank: B+ (Good)

Year of manufacture: 2010-2012
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.51kg
Serial ： MIJ U027922

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.6mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
20.6mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing