USED YAMAHA Yamaha / SA2200 Brown Sunburst [20]

YAMAHA's SA2200 semi-acoustic.
Arched maple top/sycamore back, mahogany neck/ebony fingerboard.
SAH-SAIIG" pickups are used.
A bi-sound switch is also included, allowing for a wide range of sound creation.
This model pursues a sound character that makes the most of "the sound of wood" and the beauty of the wood grain.
The block is placed in the center of the body and combines the mild sound of a semi-hollow with good response.
The bi-sand switch has been replaced with a push-pull type.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

There are some rusts on the gold parts.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2012
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 3.76kg
Serial ： HIO004I

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|22.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.8mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
22.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair