USED Gibson USA Gibson / LPB-3 Les Paul Standard Bass Natural [20]

Active spec Gibson Les Paul bass with arched top Les Paul body.
It is equipped with a Bartorini TCT-B preamp, which provides a powerful boost to the fat sound with thick sustain of the through-neck + 5kg heavyweight body.
Although it does not have the fine nuances of a jazz bass, its dense low feel, like a more powerful SG bass or Thunderbird, is recommended for bands that want a solid bottom.

* Since it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, electrical repairs (preamp replaced (TCT), aluminum foil in cavity replaced, battery snap replaced, jack replaced), cracks fixed on both sides of 1F side fingerboard, and strap pins replaced after our arrival, It is in good playing condition.

There is a ding on the back corner of the body with a paint chip.
There are many minor scratches and dings with paint dents throughout the instrument, giving it a feeling of use.
One of the clasps of the case attached is broken.

Item rank: B+ (Good)

Year of manufacture: 1997
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 5.04kg
Serial ： 92937715

Truss Rod: No problem.
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|41.5mm
Neck thickness(near 1st fret)|22.2mm
Neck thickness (near 12th fret)|25.2mm
SCALE|864mm (34")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (preamp replacement, aluminum foil replacement inside cavity, battery snap replacement, jack replacement), crack correction on both sides of 1F fingerboard, strap pin replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
41.5mm

Neck Thickness (near 1st fret)
22.2mm

Neck Thickness (near 12th fret)
25.2mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (preamp replacement, aluminum foil in cavity replacement, battery snap replacement, jack replacement), cracks on both sides of 1F fingerboard corrected, strap pins replaced