USED Fender Japan Fender Japan / BOXER Series PJ-535 Snow White [20]

1984-1987 Fujigen manufacture, BOXER series.
Alder body without pickguard, maple neck, rose fingerboard, and 32" medium scale.
Controls are 2 volume and TBX control.
Based on the Precision bass, the shape was made to be smooth and the PJ pickup was installed at an angle from the bridge on the first string side.

* After it arrived at our store, it has been cleaned, strings replaced, rods adjusted, octave adjusted, string height adjusted, rubbed, controls cleaned, and strap pins replaced.
The neck has some threading and the truss rod is not fully tightened, but it can be played with no problem at the current standard string height.

The strap pins and control knobs have been replaced, and the upper part of the control knob is missing.
There are numerous dents and dings with paint chips, cracks, and dents on the top of the head and body end.
There are dents and dings on the sides of the body.
There are other scratches and dents.

Item rank: B+ (Good)

Year of manufacture: 1984-1987
Truss Rod ： Tightened
Fretboard: 60-70% full
Accessories: soft case/not genuine
Country of Origin ： Japan
Weight ： 3.41kg
Serial ： MIJ E620677

Truss Rod: Defective, neck warped at rod limit
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|40.5mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.0mm
SCALE|813mm (32")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, strap pin replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
Neck warps at the limit of the rod due to defects

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
40.5mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
24.0mm

Scale
813mm (32")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, strap pin replacement