USED Sterling by Music Man Sterling / John Petrucci Model JP60 Pearl Red Burst [20]

It is a high quality guitar with excellent cost performance, locking pegs, stainless steel frets, roasted maple and gorgeous top material, which is both visually appealing and practical.
Basswood is used for the body material and hard maple for the neck.
Two humbucking PUs provide a clear and powerful sound, and the controls are very simple: 1Vol, 1Tone, and 3-way switch.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.

There are some signs of use such as minor scratches and small dents.
One zipper handle of the attached case is missing.

Item rank: B+ (Good)

Year of manufacture: Made in 2022
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： INDONESIA
Weight ： 3.81kg
Serial ： SG22689

Truss Rod: No problem, confirmed up to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.52mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|19.2mm
Neck thickness (near 12th fret)|20.7mm
SCALE|648mm (25.5")
RADIUS|356mm (14")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.52mm above 12th fret

Nut Width
42.3mm

Neck Thickness (near 1st fret)
19.2mm

Neck Thickness (near 12th fret)
20.7mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair