USED YAMAHA Yamaha / SA-2000S Burgandy Red [20]

With carefully selected woods and meticulous finishing, you can feel the elegance of this top-of-the-line model of the SA series.
The original humbuckers installed on this guitar are characterized by their grainy sound and respond to the perfection of the player.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been done.
The neck is slightly wavy and there are some fret dents, but it can be adjusted without sound jamming at present.

There are some white spots on the overall surface, and the gold parts have some cracks, minor rust, and peeling of the plating.
There are many small dents on the top of the body with paint cracks and dents, and overall there are minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： JAPAN
Weight ： 3.87kg
Serial ： 079243

Truss rod: No problem (slight waviness)
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|24.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

Truss rod has a note, and we have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder is defective and needs to be replaced at the time of next repair.

String height (bass string side): 2.0mm above the 12th fret

String height (treble string side) 1.5mm above the 12th fret

Nut width 42.8mm

Neck thickness(near 1st fret)20.9mm

Neck thickness (near 12th fret)24.5mm

Scale628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment