USED Gibson USA Gibson / 50s Les Paul Standard Trans Amber [20]

The "50s Les Paul Standard Plus" is a royal road model of rock guitar that everyone is longing for.
The body top is made of AA Maple with beautiful regular grain, and the pick guard is not originally installed to show the grain. (The pickguard is located inside the case.)
The slightly thicker 50's style neck grip adds to the core Les Paul sound and the sweet, fat sound of this instrument.
The pickups are equipped with Burstbucker #1 & #2. The pickups are equipped with Burstbuckers #1 & #2, which produce a superb Gibson tone regardless of clean or drive, while suppressing feedback.

* After we received this guitar, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, electrical repair (fixed broken wire), strap pin replaced (fixed screw holes), and strap pins filled in separately, so it is in good playing condition.

The strap has been relocated and has the original hole.
There are some parts that have some chips and minor rust, and there are many small dents on the back of the body with paint dents.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2006
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine pick guard
Country of Origin ： USA
Weight ： 4.01kg
Serial ： 020660566

Truss Rod: No problem, confirmed to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (fixed broken wires), strap pin replacement (fixed screw holes), and filling holes for other strap pins

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (repair of broken wires), strap pin replacement (repair of screw holes), filling of holes for strap pins