USED dragonfly / Dragonfly / CS-5 / 345 Custom Natural [20]

The CS-5/345 Custom is made with bird's eye burl on the body top and light ash on the back.
The 345 has a longer neck scale (34.5") than usual, so you don't feel the pitch sway caused by the lack of tension on the 5th string at 34", which makes for excellent playability.
The peg arrangement (2:3 on the 5th string) with the head not angled provides the necessary tension for each string, and the slightly larger cutaway allows access to the high position without compromising the overall design, and also provides excellent playability.
It is equipped with a 3-band EQ preamp (Hi, Mid, and LO), allowing for a wide range of sound creation.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

There are some signs of use such as minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: There is room to spare.
Fret: 60-70%.
Accessories: Gig bag/ Genuine spec sheet, Lock pin
Country of Origin ： Japan
Weight ： 4.28kg
Serial ： 15074SE

Truss Rod : No problem, confirmed to 60 degrees left and right
Fret height: No problem, enough fret height.
String height (bass string side)|2.6mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|47.5mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|25.3mm
SCALE|876mm (34.5")
RADIUS|406mm (16")
Strings for setup|D'Addario EXL165-XLB130T / .045-.130 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.6mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
47.5mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
25.3mm

Scale
876mm (34.5")

RADIUS
406mm (16")

Strings for setup
D'Addario EXL165-XLB130T / .045-.130 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment