USED S.Tsuji (Shiro Tsuji) / P-1 Model #2 Custo Order Model Sunburst [20]

This is Shiro Tsuji's custom order model "P-1 Model #2".
The "Chaki P-1" was created around the 1960s when Shiro Tsuji was working at Chaki Gengakuji Seisakusho (Chaki stringed instrument factory) and created a method of making authentic Japanese-made pick guitars.
The P-1 has been reissued as the S.Tsuji P-1 under the new S.Tsuji brand.
This instrument is a custom-ordered model with a 16-inch body, and the front and back are all solidly machined.
Wood materials are solid spruce top, solid hard maple sides and back, maple neck, ebony fingerboard, and ebony bridge.
The pickups are "Guild Dearmond RHYTHM CHIEF 1100" floating P.U.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

There are some parts that have some chinks and minor rust, but other than that, it is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 80% or more
Accessories: Semi-hard case / Non-genuine spec sheet
Country of Origin ： Japan
Weight ： 2.55kg
Serial ： 23382

Truss Rod : No problem, rod is set at 60 degrees to the left and right.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.2mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness(near 12th fret)|-
SCALE|625mm (24.59")
RADIUS|305mm (12")
Strings in setup|D'Addario ECG24 / .011-.050 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
44.2mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
625mm (24.59")

RADIUS
305mm (12")

Strings for setup
D'Addario ECG24 / .011-.050 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing