USED Juan Hernandez / ESTUDIO FLAMENCA [20]

Juan Hernandez flamenco guitars are made in a factory in Valencia, where flamenco guitar production is very popular.
All models are made of solid wood, with a spruce top and sycamore side backs.
The sound is very grainy and loud, making them suitable not only for classical music, but also for a wide range of genres such as bossa nova, Latin music, jazz, and so on.

* The condition is good because it has been cleaned, string replaced, and adjusted as a whole after our arrival.

There is a paint crack from the bridge to the end of the body.
There are scratches and dents on various parts of the body. Paint is cloudy on the binding and the tip of the head.

Item rank: B+ (Good)

Truss rod: No truss rod
Fretboard : 80% or more
Accessories ： Hard case / Non-genuine
Country of Origin ： SPAIN
Weight ： 1.53kg
Serial ： 2007

Truss Rod
Fret Remaining: No problem, sufficient fret height
String height(bass string side)|3.1mm above 12th fret
String height(treble string side)|2.6mm above 12th fret
Nut width|51.0mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness(near 12th fret)|-
Scale|648mm (25.5")
RADIUS|-
Strings used for setup|MATSUOKA MC1000HT / High Tension
Repair/Maintenance parts|Cleaning, string replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
-Fretboard

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
3.1mm above the 12th fret

String height (treble string side)
2.6mm above 12th fret

Nut Width
51.0mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
-RADIUS

Strings for setup
MATSUOKA MC1000HT / High Tension

Repair and Maintenance
Cleaning, string replacement