USED YAMAHA Yamaha / SL-800S Red Sunburst [20]

Yamaha's LP type model SL-800 was produced in the 1970s and 1980s.
This 70s style model has a maple top and a pancake structured mahogany back body.
It has a weighty, rich low mid and a sound that is not too rambunctious.
The bi-sound system and the careful Japanese manufacturing are also attractive features of this model.

* After receiving this guitar, it has undergone cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair.

* The neck has some waviness and high spring symptoms, and the truss rod is not tight enough, so the neck has been adjusted by mortise and tenon.

The frets have been lowered due to the fret adjustment.

There are some parts that have rust and scratches.
There are several dents on the head and both sides of the body with paint dents and paint cracks.
There are dents on the back end of the body with dents in the wood, and other minor scratches and small dents.

Item rank: B (average)

Truss Rod ： Tightened
Fretboard: less than 50%I
Accessories: soft case/genuine
Country of Origin ： Japan
Weight ： 4.52kg
Serial ： 001128

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This is a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Defective, neck warped at rod limit

Fret remainder
Note: The frets are low, but can still withstand cutting.

String Height (Bass String Side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
26.0mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair