USED YAMAHA Yamaha / SC-800 Super Combination Yellow Natural [20]

High grade model sold for a short period of time between 1977 and 1980.
Alder body, maple neck and ebony fingerboard with maple neck, nut width of about 40mm, and hardtail specification via sustain block and body.
It has a variety of sound variations with dedicated single coil and ON-OFF-reverse phase switch for each pickup.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck has a high spring condition and has been adjusted by fret adjustment.
The truss rod adjustment width is low and the frets are low.

There are some rusts and scratches on the parts.
There is a small ding on the corner of the head with paint dents and cracks, and there are paint chips at the neck joint.
There are other minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories: Hard Case / Genuine
Country of Origin ： Japan
Weight ： 3.48kg
Serial ： 002718

Truss Rod: No problem, confirmed up to 60 degrees left and right (with a little remaining and high spring)
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.4mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|23.6mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right.

Fret Remaining
There is a note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.4mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
23.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair