USED EDWARDS Edwards / ERB-80 Black [20]

Ricken Type ERB-80 from the 1993 catalog.
It has an alder body, maple one-piece bolt-on neck, ESP original EBH-1 pickups, and very thimble controls with only master volume and pickup selector.

There are dings with paint chips on the apex of the head and neck volute.
There are numerous small dents on both sides of the body with paint dings and paint cracks on the corners, and there are numerous scratches on the body back.
There is a paint chip on the body side of the neck joint, which has been repaired in black, and there are other scratches and small dents throughout.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon, broken screws taken out and screw holes corrected in 12 places (4 places in 2 places in each escutcheon, 3 places in bridge, 5 places in back panel), selector, escutcheon, bridge installation Screws, joint bushings, joint screws replaced

Item rank: B+ (Good)

Truss rod : Enough room
Fretboard: 60-70%.
Accessories : Soft case/not genuine
Weight ： 3.83kg
Serial : No

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.9mm
SCALE|864mm (34")
RADIUS|254mm (10")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.9mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment