USED K.Yairi K.Yairi / FK-1 [20]

This is a rare and valuable model featuring flower carvings, which is now out of production.
The inlays on the bridge and binding are also unique.
There is no official data and we cannot be sure, but we think the wood materials are Spruce top and Maple sideback body, Mahogany neck and Ebony fingerboard.

* There is a neck high fret. High frets are very low due to fret mortise. The saddle has been processed by adjusting the string height, but if it is any lower around the 6th string, the saddle will not be tensioned and chattering will occur, so this is the limit.
The guitar has been cleaned, strings replaced, rods adjusted, string height adjusted, and mortised, so it can be used without any problems in its current condition.

There are dents with wood peeling on the body top and line scratches on the body back.

Item rank: B+ (Good)

Year of manufacture: 1992
Truss Rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories: soft case/not genuine
Country of Origin ： Japan
Weight ： 1.65kg
Serial ： 42340

No fret remaining
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|19.9mm
Neck thickness(near 12th fret)|-
SCALE|635mm (25")
RADIUS|406mm (16")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No fret remainder problem, sufficient fret height.

String height (bass string side): 2.5mm above the 12th fret

String height (treble string side) 2.0mm above the 12th fret

Nut width 42.8mm

Neck thickness(near 1st fret)19.9mm

Neck thickness (near 12th fret)

SCALE635mm (25")

RADIUS406mm (16")

Strings D'Addario EJ-16 / .012-.053 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, string height adjustment, mortise and tenon adjustment