USED Fujige (FGN) Fujigen / J-Standard JMJ-ASH-DE-M Transparent Black Flat [20]

It features a glossy finish, 24-fret specification, and active pickups.
The body is made of light weight ash, the neck is one-piece maple, and the fingerboard is also made of maple.
The controls are simple: 2 volume and 1 tone. The pickups are EMG J in the front and EMG MM-TW in the rear, and the rear can be coil-tapped by pulling up the tone knob to utilize it as a single coil for a wide range of sound creation.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The neck is slightly wavy and has been adjusted by fret adjustment, so it is in good playing condition.

There are some parts that have some stains, but other than that, it is in good condition with only minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture : 2018
Truss rod : There is enough room
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Japan
Weight ： 4.52kg
Serial ： G180483

Truss rod: No problem (slight waviness)
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.1mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.5mm
SCALE|864mm (34")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight waviness).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
38.1mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
24.5mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing