USED Epiphone Epiphone / Made in Japan LPS-80 Les Paul Standard Cherry Sunburst [20]

This is an Epiphone Les Paul Standard "LPS-80" made in Japan in the 90s.
It has the same head shape as Gibson's and is made in Japan with the same high quality and care.
It has the rich and bright sound of a Les Paul, and the deep-jointed neck provides sustain and high quality.
The pickups are not listed on this guitar.

There are several small dents and dings with paint chips and dings on the corners of the head between the 6th and 5th string posts and on the top corner of the head.
There are dents near the body back jack and on the sides of the body.
There are small dents and dings on the top of the body under the bridge and next to the pickguard, and other minor scratches and dings.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, truss rod nut grease up, position mark floating correction (3rd, 5th, 7th, 9th frets)

Item rank: B+ (Good)

Year of manufacture: 1999
Truss Rod : Plenty of room
Fret : 60～70
Accessories ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 3.99kg
Serial ： 910622

Truss Rod : No problem, confirmed up to 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|25.2mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, truss rod nut greasing, position mark lift correction (3rd, 5th, 7th, 9th frets)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 44.0mm

Neck thickness(near 1st fret)21.2mm

Neck thickness (near 12th fret)25.2mm

Scale628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, truss rod nut greasing, position mark float correction (3rd, 5th, 7th, 9th frets)