USED Fender USA Fender / Classic 50s Stratocaster 2-Color Sunburst [20]

This classic Stratocaster was built in the style of '57.
It is built with a focus on playability while reproducing all the charm of the Fender Vintage.
Based on Alder body and Maple neck wood material, original vinyl wire type pickups are installed.

* The joint plate has been changed to one made by FREEDOM.

There is a ding with paint cracking on the body side near the jack.
There are other minor scratches, small dents, and dull metal parts.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fret side burr removal, replaced all pickup covers with genuine ones, replaced all control knobs with genuine ones, replaced selector knob with genuine one, replaced tremolo spring with genuine one, replaced back panel with genuine one, and Pickup mount rubber deteriorated, replaced with new springs, electrical repairs (replaced with genuine capacitors), selector switch and all control pots cleaned.

Item rank: B+ (Good)

Year of manufacture: 2011
Truss Rod ： Plenty of room
Fretboard: 60-70%.
Accessories ： Soft case / Genuine arm
Country of Origin ： Mexico
Weight ： 3.36kg
Serial : MX11227366

Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, removal of fret side burrs, replacement of all pickup covers with genuine ones, replacement of all control knobs with genuine ones, replacement of selector knob with genuine one, replacement of tremolo spring with genuine one, replacement of back panel with genuine one Replace all pickup covers with genuine ones, selector knobs with genuine ones, tremolo springs with genuine ones, and back panel with genuine ones.

* Due to used condition, there may be scratches, dents, etc. that are difficult to see in the photos, or scratches other than those listed. Please note that there may be scratches, dents, etc. that are difficult to see in the photos or are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.