USED Gibson Custom Shop / 1954 Les Paul Custom Reissue LH Ebony [03]

Gibson Custom Shop /1954 Les Paul Custom Reissue LH Ebony made in 2004 is now in stock!
This is a reissue model of the Les Paul Custom that was first produced in 1954!
This model is a rare lefty model with few production numbers!

It has the same specs as the original model with 1-piece mahogany body, mahogany neck, and ebony fingerboard.
The neck shape is a thick C-shape, which is typical of the '54 model.
The bridge is the "ABR-1 (TOM)" type that was developed and adopted in 1954, reproducing the original specifications.

The finish color is "Ebony," which is well-known for Les Paul Custom.
The Ebony finish color is a beautiful pitch black color that was created based on the concept of "looking good in a tuxedo.
The paint job is so thin that you can see the conduit of mahogany, which is also attractive.

Alnico V (P-480) pickups on the front and P-90 pickups on the rear are original.
The combination of these two pickups, a characteristic of the 1954 Les Paul Custom, gives it a truly unique sound.
The combination of these two pickups, which are the hallmark of the 1954 Les Paul Custom, makes for a truly unique sound. The all-mahogany body gives the guitar a thick, lustrous sound with a sense of brightness, making it suitable for a variety of genres, from blues and jazz to rock.

The condition of the instrument has some scratches and minor dents throughout.
The truss rod is slightly tightened, but there is room to tighten or loosen it.
The frets are about 60-70% full, and the nut height and fret groove have been adjusted.
The nut height and fret groove have been adjusted.

This is a rare 1954 reissue model equipped with special Alnico V pickups!
In addition to being a valuable model, this model is a lefty model, which means that it is one of the rare ones that were produced in even smaller numbers!
If you are looking for a lefty model, please consider this opportunity!
Truss Rod: Tightening direction has room / Loosening direction has room
Neck Condition: No problem
Fret: 60-70%.
Case: Genuine hard case
Accessories: Certificate, manual, tags, pegs (Grover keystone button type), toggle switch cap (black)
Serial number: 4 4040
Weight: 4,735kg

* Due to the nature of this item, we will not be able to show or move it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: 4 4040
Country of manufacture: USA
Case: Hard Case
Weight: 4.735kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.23mm
Neck thickness near 1st fret: 23.48mm
Neck thickness near 12th fret: 26.14mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
4 4040

Country of manufacture
U.S.A.

Case
Hard Case

Weight
4.735kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.23mm

Neck thickness near 1st fret
23.48mm

Neck thickness near 12th fret
26.14mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment