USED EPIPHONE / FLYING V Ebony [03]

EPIPHONE FLYING V Ebony is in stock used.
The frets are low.

The frets have been adjusted to match the fretboard, so it is in good playing condition and can be used without any problems.

There are scratches and dings on the body, buckle marks on the back, paint burn on the body end, scratches on the side, rust and tarnish on the metal parts. This item has been cleaned, maintained and set up by our repair department.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: S99035345
Case: Soft case
Weight: 3.38kg
Truss Rod: Less than half of the truss rod remains on the tightening side.
Fretboard: note that the frets are low and can still be milled.
String Height Low String Side: 2.0mm above the 12th fret
High string on treble side: 1.5mm above the 12th fret
Strings at setup: .010-.046 set
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, neck ironing, and rubbing

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
S99035345

Case
Soft case

Weight
3.38kg

Truss Rod
Less than half of the rod remains on the tightening side

Fretboard remaining
Note: Still stands up to cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Strings at set up
.010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, and friction adjustment