USED FENDER CUSTOM / 1960 Stratocaster NOS 3-Tone Sunburst [03]

The 2006 Fender Custom Shop 1960 Stratocaster NOS 3Tone Sunburst is now in stock!

Based on the popular 1960 Stratocaster, this one features a 2-piece alder body, maple neck, and slab-applied rosewood fingerboard.
The fretboard radius is 7.25R and 21 vintage-type thin frets are mounted.
The neck shape is a thin C-shape that fits easily in the hand.
The guitar also features 11-point 3-ply pickguard, cradot position marks, and spaghetti logo, all of which are reproduced from the early 1960s.

Three black bobbin pickups, which are believed to be original, are installed.
The inside of the cavity shows signs of having been re-soldered, but it is believed that no parts have been replaced.
The sound is characterized by the rich overtones and sparkling tone typical of this age.
Controls include a 3-way switch, master volume, front PU tone, and center PU tone.

The overall condition of the instrument shows many scratches, dents, scuffs, and dull parts. There are picking scratches on the top of the body and buckle marks on the back.
The guitar is in good condition, but there are no problems with the playing surface.
The accessories are a certificate of authenticity, arms, manuals, and a replacement 5-way lever switch.

The vintage-like look and sound of this guitar is very attractive, despite its royal specs!
Please consider this opportunity!
Truss Rod: Tightening direction has room / Loosening direction has room
Neck Condition: No problem
Fret: 70-80%.
Case: Genuine hard case
Accessories: Certificate, arm, manuals, 5-way switch, etc.
Serial number: R29655
Weight: 3.57 kg

* Due to the nature of this product, we are unable to move it between stores.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: R29655
Case: Hard Case
Weight: 3.57kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the item. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number R29655

Case Hard Case

Weight 3.57kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.2mm

Neck thickness near 1st fret 20.2mm

Neck thickness near 12th fret 24.0mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings .009-.042 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction