USED Paul Reed Smith (PRS) / 2016 Hollowbody II Piezo 10Top Bonnie Pink Pattern Neck [03]

A used 2016 Hollowbody II Piezo 10Top is in stock!

Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Ebony fingerboard.

Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded and has a slightly grippy feel compared to Pattern Regular.

Pickups
The 58/15TM pickups are vintage-style pickups designed together with the 85/15 pickups, and are characterized by their outstanding clarity and sharp mid-range.

The Hollowbody II Piezo is equipped with the PRS/LR Baggs piezo system as standard, allowing you to play acoustic and electric guitar tones with just one pickup. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.

Condition.
The guitar is in relatively low use condition, with some dulling of parts and other minor scuffs and scratches.
The neck, frets, and truss rod are all in good playing condition.
The instrument has been fully adjusted and cleaned at our repair center when it arrived, so you can use it with no worries.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 16 227392
Year of manufacture: 2016
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tag, wrench, manual
Weight: 2.50kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.6mm
Neck thickness near 12th fret: 24.4mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL115W / .011-.049 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, toggle switch adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.