商品情報にスキップ
1 17

USED FENDER USA / 1966 Jazzmaster Sunburst [03]

Serial Number : 117780

[SN 117780] USED FENDER USA / 1966 Jazzmaster Sunburst [03]

Item Code: 03-2800005452228
Condition: USED
Store: [03] ochanomizu

通常価格 ¥1,557,817 JPY
通常価格 セール価格 ¥1,557,817 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to pay by bank transfer, please email us the item number of the product you wish to purchase.
For customers residing in Japan
A 1966 Fender Jazzmaster has just arrived!!

The Fender Jazzmaster was released in 1958 as a high-end model.
Although it was originally developed for jazz musicians, as its name suggests, its unique sound and distinctive design have led to its use in rock, alternative, grunge, shoegaze, and indie rock genres. Today, it is one of the most popular models and is loved by many guitarists.

It features a classic sunburst-finished alder body with a tortoiseshell-patterned pickguard.

The neck, marked “13JUN66B,” is a 1966 maple neck with a rosewood fingerboard.
It features specifications typical of that era, such as a bound neck and block position marks.

The neck shape is a slightly thin C-shape that gives the impression of becoming
, making it a comfortable neck that’s typical of that era.

It is equipped with two pickups with gray bobbins.
The front pickup is dated 7-11-66, and the rear pickup is dated 10-14-66; both were manufactured in 1966.
Additional foam padding has been added beneath the pickups.

The sound has the crisp clarity typical of a Jazzmaster and
.

The volume pot is 304-6610, and the tone pot is 304-6612; both are original parts manufactured in 1966.

Although the dates on the pots in the preset section were not visible, they are believed to be original.
The neck has been adjusted with shims.

The truss rod nut has been replaced, and there are signs that the binding at the top of the truss rod
shows signs of having been cut and re-glued.

The nut has been replaced, and the bridge has likely been swapped out for a domestic Mustang-type bridge.
The tuning pegs for the 1st, 3rd, and 4th strings, as well as the switch knob, have been replaced.

The frets are set low, and there are areas where the sound gets muffled when bending in the higher positions,
, but since they are the original frets, they have not been replaced.

Overall, there are signs of wear such as scratches, dents, and peeling paint, but
and has a cool look!

The Vintage Jazzmaster is highly sought-after, and its value continues to rise year after year.
Please be sure to take advantage of this opportunity!

* We sincerely apologize, but we are unable to accommodate inquiries regarding this item at other Ishibashi Music stores or through our mobile service.
Please direct all inquiries to the Ishibashi Music Ochanomizu Main Store.
Truss Rod: Tested up to 60 degrees in both directions—no issues (some playability remaining)
Neck Condition: Slightly wavy
Frets: Slightly low
Case: Non-original hard case (shows some wear)
Accessories: Tremolo arm
Serial Number: 117730
Weight: 3.67 kg

Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use

Serial Number: 117730
Year of Manufacture: 1966
Country of Manufacture: United States
Case: Hard case
Accessories: Tonearm
Weight: 3.67 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (frets are somewhat worn)
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.29 mm
Neck thickness near the 1st fret: 21.52 mm
Neck thickness near the 12th fret: 22.94 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and removal of string buzz

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
1966年製Fender Jazzmasterが入荷いたしました!!

1958年に上位機種として発売されたFender Jazzmaster。
当初は名前の通りジャズミュージシャン向けに開発されましたが独自のサウンドや個性的なデザインによりロック、オルタナティブ、グランジ、シューゲイザー、インディーロックなどで使用され今では人気モデルの1つとして多くのギタリストに愛されています。

定番のサンバーストフィニッシュのアルダーボディにべっ甲柄のピックガードを搭載。

ネックはデイトが13JUN66Bで66年製のメイプルネック、ローズウッド指板です。
バウンドネック&ブロックポジションマークといったこの頃あたりからの仕様となっております。

ネックシェイプは薄めのCシェイプでハイポジションに行くにつれてより
スリムになる印象のあるこの時期らしいシェイプで馴染みの良いネックです。

PUはグレイボビンを2機搭載。
フロントPUのデイトは7-11-66、リアPUのデイトは10-14-66でどちらも66年製です。
PU下にはスポンジが増設されております。

サウンドはジャズマスターらしい歯切れの良さがあり音抜け
の良いサウンドです。

Vol Potは304-6610、Tone Potは304-6612でともに66年製でオリジナルです。

プリセット部のポット類はデイトが見えませんでしたがオリジナルと思われます。
ネックはシムを入れて調整しております。

トラスロッドのナットが交換されておりロッド部上部のバインディングが
一度切られ再接着された形跡がございます。

ナットは交換されておりブリッジは恐らく国産のムスタングタイプのものへ交換されております。
1弦、3弦、4弦のペグとスイッチノブが交換されています。

フレットは低めとなっておりハイポジションでのチョーキング時に音づまりが発生する箇所
がございますがオリジナルフレットのため交換はしておりません。

全体的に傷、打痕、塗装剥がれなど使用感がございますがVintageらしい
雰囲気のあるルックスがクールな1本です!

人気があり年々高騰が続くVintage ジャズマスター。
ぜひこの機会にご検討くださいませ!

* 誠に恐れ入りますが、こちらの商品は、イシバシ楽器内の他店舗・移動でのご案内は全て御遠慮させていただきます。
お問い合わせはイシバシ楽器御茶ノ水本店にお願い申し上げます。
トラスロッド:ロッド左右60度まで確認済みにて問題なし(残り少なめ)
ネックコンディション:やや波打ちあり
フレット:低め
ケース:ノンオリジナルハードケース(痛みあり)
付属品:アーム
シリアルナンバー:117730
重量:3.67kg

商品ランク: B:かなり、傷&使用感はあるが、通常使用する用途において問題なし

シリアルナンバー: 117730
製造年: 1966
製造国: アメリカ
ケース: ハードケース
付属品: アーム
重量: 3.67kg
トラスロッド: 注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り: 注意点ありまだ切削に耐えるがフレット低め
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.29mm
ネック厚1フレット付近: 21.52mm
ネック厚12フレット付近: 22.94mm
スケール: 648mm (25.5")
RADIUS: 184mm (7.25")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・ガリ取り

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4