USED James Tyler / Studio Elite HD Rear Rout Trans Blue Burst [03]

A beautiful pre-owned 2020 USA-made James Tyler "Studio Elite HD" is in stock!

JAMES TYLER started with the "Studio Elite" series of guitars designed to support the diverse music scene of the 80's, followed by the rise of the "Classic Style" in the 90's, and then the "Retro Series", "HD Series", "Mongoose Series", and many more to support the current music scene of the 2000's, which is considered a great mixture of music and music. The "Retro Series," "HD Series," "Mongoose Series," and many other models have been introduced to the world. The Studio Elite HD from JAMES TYLER, the pinnacle of component guitars, is now in stock!

Body, Neck, Fingerboard
The body is made of carefully selected Quilt Maple top and ribbed Mahogany. The body is made of Quilted Maple top and ribbed Mahogany, which produces a fat, glossy sound with good sound extraction. The neck is made of Quartersawn Maple and the fingerboard is made of Pau Ferro.

The neck shape is "Thin '59". The satin finish is smooth and silky, and the thin grip makes it a perfect match for any playing style.

Pickups
The pickups are "RETRO, JTS5500, and ANGRY RETRO" in direct mount.

The ANGRY RETRO pickups are matched with the RETRO pickups and have a slightly higher output and thicker midrange than the HOT RETRO pickups.

The RETRO has a warm PAF-like clean sound, not too bright highs, and a balanced midrange, with a well-defined overdrive sound and a creamy, classic tone. The JTS5500 has a classic tone, excellent balance, and glossy high and low mids.

The JTS5500 is a single-coil pickup designed specifically for S/S/H, using the same magnet and wire as the original 5250 pickup set, which was developed based on James Tyler's original idea, but with a 500k volume pot for a balanced S/S/H sound. H sound output.

Controls
The controls are simple enough to be acceptable to many players, with a master volume, 5-way selector, master tone, mid boost, and mid boost bypass switch.
Although this model has a very simple structure in terms of controls, there are no usable or unusable notes in the 5-way switch, and the ability to produce superb sounds in all positions is one of the strengths of James Tyler guitars.

The PU controls are as follows.

Bridge PU (humbucker)
Bridge PU (humbucker) + middle PU (single coil)
Bridge PU (humbucker) + Neck PU (humbucker)
Neck PU (humbucker) + Middle PU (single coil)
5. Neck PU (humbucker)

* The bridge PU and neck PU are coil-tapped with the tone knob Push/Pull.

JAMES TYLER guitars are not often in stock, as only a few hundred are made each year worldwide due to the use of carefully selected materials and the extremely meticulous manufacturing process. JAMES TYLER has been in the news.

Although expensive, once you touch one of these guitars, you will lose track of time and concentrate on playing. We hope you will experience its sound.

Condition
Beautiful condition with little use! Of course, the neck, frets, truss rod, and all other playing-related conditions are in perfect condition.
The neck, frets, truss rod, etc. have all been adjusted at our repair center when the guitar arrived.
Serial number: 20020
Year of manufacture: 2020
Country of manufacture: USA
Case：Hard case (genuine)
Accessories：Arm, spec sheet
Weight: 3.20kg
Truss Rod: No problem, rod is confirmed to be 60 degrees to the left and right.
Fret remaining: No problem, same condition as new
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 41.3mm
Neck thickness (near 1st fret): 21.0mm
Neck thickness (near 12th fret): 24.1mm
Scale：648mm (25.5")
RADIUS：10-12"
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

Item rank: A : Beautiful