USED Fender Custom Shop / 1960 Stratocaster NOS 3-Tone Sunburst AAA Figuard Neck [05]

Custom Shop Stratocaster with figured maple neck and jumbo frets!

Made in 2020. Fenter Custom Shop's 1960 Stratocaster NOS 3TS Figuard Maple Neck is now in stock!
Specifications are a lacquer-finished 2P Alder body, slab rosewood-applied maple neck, Fender 60's neck shape with a slightly thicker grip, 9.5R fingerboard radius, and "JUMBO 6100" 21 frets. Three "Fat 50's Strat" pickups are installed. The combination of the rosewood fretboard, thick neck, jumbo frets, and pickups produces a fat sound, mixing the sound of the 50s with the look of the 60s, while incorporating modern elements such as figured maple necks, The overall look and sound are well balanced without any sense of discomfort. After the purchase, it has been adjusted at our repair center to ensure playability.
It is a beautiful used instrument with few scratches.
At first glance, it looks like a universal 60 Stratocaster, but it is a unique one with some unique specs.

Body
Body wood: Alder 2PC
Neck Pickup: Strat Fat 50s Neck
Middle Pickup: Strat Fat 50s Mid
Bridge Pickup: Strat Fat 50s Bridge
Control: Strat Modern Wiring

HARDWARE
Bridge: Am Vint Strat Bridge
Output：Vint Strat
Back Plate: Strat Vint
String Tree：Am Vint 59-64 Metal SPR
Trem Arm：Vint Upgraded 60s
Trem Arm Tip: White NOS
Pickguatd: 60 Strat Nitro WBW

ELECTRONICS
Controls: Strat Modern Wiring
Selector Switch: 5Way CRL
Switch Tip: White
Tone Knob: Strat SM FT Tone WHT
Volume Knob：Strat SM FT Volume WHT
Pot: 250K 10% Taper Sprit

NECK
Like: 60 Strat
Neck Finish: FL_CT_LAC LTTINT
Neck Blank: Flame AAA
Fretboard Wood: Guitar CITES RW AAA 9mm
Truss Rod：Early 60s
No. of fret: 21
Tuning Key: Vintage White
Head Style: Small
Fret Wire: Jumbo / 6100
Face Dot: Micarta White .250
Fret Board Radius: 9.50" Radius
Neck Spec 1st Fret: .790"
12th Fret: .930"
Nut Material: Bone
Side Dot:
Face Dot: Micarta White 3/32"
Decal: 54-60 Strat w/OCB

Item rank: A: Beautiful

Serial Number: R108487
Year of manufacture: 2020
Case: Hard Case
Weight: 3.46kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String height on bass side: 1.6mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank A: Beautiful

Serial number R108487

Year of manufacture 2020

CaseHard case

Weight 3.46kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height 1.6mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near 1st fret 20.5mm

Neck thickness near 12th fret 24.1mm

SCALE 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment