USED EDWARDS / Taki E?SUFFER FurnitureNatural [06]

9mm Parabellum Bullet Taki E?SUFFER, signature model by Yoshimitsu Taki, is in stock in used condition.
Ash body, maple neck, maple fingerboard. The pegs are equipped with a Sperzel Trim-Lock, which holds the strings firmly in place and improves tuning stability.
The rear pickup is a DiMarzio DP155F Tone Zone with high output and wide dynamic range.
Controls are standard with Master Volume, Master Tone, and 5-way Lever PU Selector.

The head has numerous scratches with chips in the wood and peeling paint. The back of the neck also shows signs of use, with minor dents scattered throughout.
The top and sides of the body have dings with paint chips, and the entire body (both front and back) has numerous dings.
There is also a discoloration of the paint on the end of the body.

The metal parts also show rust and tarnish on the screws and other scratches, giving the overall appearance a sense of use.

The truss rod has been adjusted and cleaned at our repair center, and although there is not much room left for adjustment, there are no problems with the playing condition at present.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: ED1144453
Case: Hard Case
Weight: 3.60 kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees to the left and right (not much left).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number ED1144453

CaseHard case

Weight 3.60kg

Truss rodCaution: Checked up to 60 degrees on both sides of the rod, no problem (not much left)

Fret remainderNo problem, sufficient fret height.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

ERNIE BALL 2221 / .010-.046 set strings at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment