USED SCHECTER / NV-III-24-AS TransBlue [06]

The SCHECTER NV-III-24 is a high-cost performance model that offers high playability and versatile sound making.
The body is a combination of quilted maple/maple top ash back, maple neck, and pasted maple fingerboard.
H-S-H pickups are mounted on the pickups.
The humbucking pickups can be coil-tapped with a mini-switch, and the sound ranges from powerful and well suited for distortion to a clear, high-pitched single sound that is also good for cutting, making it suitable for a wide range of music.
There is rust on the PU pole piece/screws, many dents on the tip of the head, paint chips near the jack, blackening on the side of the fingerboard, dents and scratches on the body, picking scratches and buckle scratches, and a lot of signs of use. The strap pin has been replaced.
It has been cleaned and adjusted as a whole after arrival, and the jack has been replaced.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: SA091478
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.79kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modified part: Jack
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, jack replacement, deburring

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number SA091478

Country of manufacture Japan

CaseSoft case

AccessoriesArm

Weight3.79kg

No truss rod problemNo truss rod problem.

No fret rest problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Strings in setup ERNIE BALL 2223 / .009-.042 set

Modified part jack

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, jack replacement, deburring