USED GIBSON USA / ES-135 Sunburst [06]

The Gibson ES-135 is popular for its mellow sound and playability.
It features a traditional "Florentine cutaway" thin body equipped with two P-100 pickups.
It features a hybrid design that combines the classic look of the full-hollow ES-175 with a slightly thicker version of the semi-hollow ES-335’s thin body, constructed with a laminated maple body, maple neck, and rosewood fingerboard.
Despite its relatively thin body, the semi-hollow construction with a center block delivers a solid sound and excellent resistance to feedback, making it a standout among hollow-body guitars.
The pickguard is missing, and there are circular bushing marks around the top tuners on the headstock, likely from a previous tuner replacement.
There are signs of repainting on the back of the neck near the headstock (likely from a previous neck break repair).

There are multiple small chips in the finish on the top of the body, the headstock tip, the neck heel, and the lower body. The binding also has numerous dents and chips in the finish. The fingerboard has overall wear and scratches from playing.
The back of the neck shows weather checking, impact marks, and a loss of gloss due to age.
The body back has case marks and some red color transfer. Overall, this is a well-used instrument with many scratches.
Since arrival, the strap pins have been replaced, and the guitar has been cleaned, fully adjusted, and the frets have been leveled.

Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use

Serial Number: 93425513
Year of Manufacture: 1995
Country of Manufacture: USA
Case: Hard case (damaged)
Weight: 3.87 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Neck thickness near the 1st fret: 21.7 mm
Neck thickness near the 12th fret: 24.9 mm
Scale: 628mm (24.75")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and dressing

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.