商品情報にスキップ
1 16

USED FENDER JAPAN / ST72-95DM YWH [06]

Serial Number : MIJ/J036351

[SN MIJ/J036351] USED FENDER JAPAN / ST72-95DM YWH [06]

Item Code: 06-2800005515541
Condition: USED
Store: [06] shinjuku

通常価格 ¥140,400 JPY
通常価格 セール価格 ¥140,400 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to pay by bank transfer, please email us the item number of the product you wish to purchase.
For customers residing in Japan
We've just received a used FENDER JAPAN ST72-95DM!
Manufactured by Fujigen from 1989 to 1990.
Features a basswood body with a maple neck and fingerboard.
Equipped with Dimarzio HS-3 pickups in the front and rear positions, and a Fender Japan-made single-coil pickup in the center position.
It features a large headstock and a scalloped fingerboard.
There is damage, such as chips and dents, on the top of the headstock.
There is a noticeable dent on the body surface near the end.
There are buckle marks and dents on the back of the body.
There are dents in several places on the sides of the body.
There is also some tarnish on the metal parts, as well as fine dents and scuffs.
The back panel is missing.
The instrument has been cleaned and fully adjusted since arrival and is in perfect playing condition.
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: MIJ/J036351
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.02 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (frets are somewhat worn)
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Scale: 648 mm (25.5")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting surface leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
FENDER JAPAN ST72-95DM 中古入荷いたしました!
1989年~1990年 フジゲン製造。
バスウッドボディにメイプルネック・指板の仕様。
ピックアップはフロントとリアにDimarzio HS-3、センターにフェンダー日本製シングルコイルを搭載。
ラージヘッド、スキャロップドフィンガーボード仕様です。
ヘッドトップに欠け・打痕等のダメージがございます。
ボディ表面のエンド付近に目立つ打痕がございます。
ボディバックにバックル傷や打痕がございます。
ボディサイド数カ所に打痕がございます。
その他金属パーツのくすみや細かい打痕、擦り傷がございます。
バックパネル欠品しております。
入荷後クリーニング、全体調整を行っており演奏上の問題なくお使いいただけます。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: MIJ/J036351
製造国: 日本
ケース: ソフトケース
付属品: アーム
重量: 3.02kg
トラスロッド: 注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り: 注意点ありまだ切削に耐えるがフレット低め
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
スケール: 648mm (25.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4