USED DEAN / Michael Amott Tyrant Bloodstorm MOD [10]

The “Michael Amott” Signature Model!
The rear pickup has been replaced with a Seymour Duncan SH-13 Dimebucker. The jack position and specifications have been modified, and the control layout has been changed to a master volume/pickup selector. The hole for the original jack position remains intact. The strap pins have been replaced with locking types.
There is a dent with paint chipping on the lower part of the body, a paint crack at the neck joint, and a small dent around the perimeter of the headstock. However, from the front—the most common viewing angle—there is relatively little damage that stands out at first glance. The hardware functions properly and has been polished to a relatively clean finish.

Condition: B+: Some scratches, but no issues for normal use

Serial Number: US1170284
Year of Manufacture: 2011
Country of Manufacture: South Korea
Case: Semi-hard case
Accessories: Lock pin parts
Weight: 3.24 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.7 mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Rear pickup replaced with a Seymour Duncan SH-13 Dimebucker. Jack position and specifications changed; control layout modified to Master Volume/Pickup Selector. The hole for the original jack position remains. Strap pins replaced with locking type.
Repairs & Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There is a dent with paint chipping on the lower part of the body, and a small dent on the outer edge of the headstock. However, from the front—the most common viewing angle—there is relatively little damage that stands out at first glance. The hardware functions properly and has been polished to a relatively high shine.

* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.