USED Warwick / Corvette Proline 4st Green [11]

Warwick Corvette Proline 4st Green made in 1996 is now in stock!
The distinctive long horns and body contours for a better fit are designed to provide excellent playability. The hard 2-ply flame maple body with beautifully grained wood, and the 3-ply maple neck with wenge fingerboard are bolted on. The nut width is about 38mm and 24F long scale. The pickups are Warwick's original MEC JJ layout. Controls are active circuit with 1 volume, PU balancer, and 2-band EQ. The master volume is push/pull so you can switch between active and passive. The guitar emits a noiseless and powerful output with excellent picking response and a hard, tight sound.
The body is dotted with dings and scratches. The neck area is also dotted with scratches and dings, but there are currently no problems with use. The hardware is relatively clean and polished with no operational problems, although there is some deterioration such as dullness and peeling of the plating.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Country of manufacture: Germany
Case: Non-authentic soft case
Weight: 3.89 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.0mm
Neck thickness near 1st fret: 19.2mm
Neck thickness near 12th fret: 23.8mm
SCALE: 864mm (34")
RADIUS: 508mm (20")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Germany

Case
Non-genuine soft case

Weight
3.89kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.0mm

Neck thickness near 1st fret
19.2mm

Neck thickness near 12th fret
23.8mm

Scale
864mm (34")

RADIUS
508mm (20")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair