USED Epiphone / Elite/Elitist 1965 Casino Made in Japan Vintage Sunburst [11]

The "Elite 1965 Casino" Japan limited edition model faithfully reproduces the style of 1965 is now in stock!
Made in Japan" by Terada Gakki!

Laminated maple body, mahogany neck and rosewood fingerboard.
Two USA-made P-90 type pickups are equipped, with the standard ABR-1 bridge and Grover pegs.
The body resonates well and matches the warm sound of the pickups.
The tone is very pleasant and comfortable, and it does not become too heavy on strokes.
Overall, there are scratches and dents.
Metal parts are rusty and dull, and a rod cover was missing, so it has been made and installed.
There is a screw hole on the cutaway due to a change in the position of the strap pin.
* Pickguard is missing.
There is no noticeable abnormality on the neck, and there is no problem in playing condition.
Item rank: B+: Some scratches, but no problem in normal use.

Serial Number: T806899
Country of manufacture: Japan
Case: Original hard case
Weight: 2.78kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 24.2mm
SCALE: 624mm (24.56")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
T806899

Country of manufacture
Japan

Case
Genuine hard case

Weight
2.78kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
24.2mm

Scale
624mm (24.56")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair