USED Fujigen / JMJ-ASH-M Vintage Natural [11]

Japanese-made JB type bass with outstanding playability and tone
The Fujigen JMJ-ASH-M is a Japanese-made JB-type bass featuring an ash wood body. The rounded fret edges and Circle Fretting System (C.F.S.) provide a smooth and comfortable playing feel. The front and rear PUs can be switched between series and parallel for a variety of tonal expressions.
The 2-way bridge can be used for both string-through and stop-tail operation, and the resonance and attack can be freely adjusted. Beautiful finishes such as Vintage Natural and See-through Blue Burst are also attractive.
With the quality and playability that can only be achieved with a bass made in Japan, this is a bass that can be used with confidence for a long time.
There is a small ding on the back of the neck near the 15th fret on the 4th string side, and small paint chips on the joint on the 1st string side and the top of the body.
Other than that, there are some minor scratches, but the bass is in relatively clean condition.
The neck is a little wavy, but the high frets have been treated by abrading.
The neck is slightly rippled, but the high fret area has been treated by abrading, and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: A180465
Year of manufacture: 2018
Country of manufacture: Japan
Case: Original soft case
Truss Rod: No problem (with a note that the rod has been checked up to 60 degrees to the left and right).
Fret Height: No problem, fret height is sufficient.
String height on bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.6mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 24.8mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
A180465

Year of manufacture
2018

Country of manufacture
Japan

Case
Genuine soft case

Truss Rod
No problem (with a little high spring)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.6mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
24.8mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing